Can I fix the failing device from my phone with one tap, without opening a laptop at 2am?

Approve a runbook once, then run it from the alert on your iPhone, Apple Watch, the web or the command line behind one confirm. What it does, how it is limited, and what is not proven yet.

Short answer

Yes, for runbooks you approved in advance. When an alert fires you press Run runbook on the notification, or on the alert in the iPhone app, the Apple Watch app, the Alerts page or the command line, and confirm; it runs once on the alert’s device. On 2026-11-08 it ran from the notification on a real iPhone, on a real collector’s real alert; the command line and web on 2026-11-02. The Watch run is still a simulator.

Updated 2026-11-07. Every quote links to where it was published.

In admins’ own words

“quickly resolve issues right from the application or mobile app. Being able to quickly restart an access point or switch”

Capterra reviewer of a network monitoring tool, 2020-10-01 · source

“automation of remediation is the next-level frontier missing.”

Capterra reviewer of a network monitoring tool, 2025-08-21 · source

What it is

The slow part of a 2am outage is rarely the diagnosis; it is getting to a screen that can restart the thing. A runbook you wrote and approved in daylight, run from the notification that woke you, removes that step without letting an alert act on its own.

How SoloNOC does it

  • An admin first allows a runbook for one tap with the One tap from phone and watch checkbox on the Runbooks page. Only approved runbooks are offered, and the approval is checked again when the button is pressed, so withdrawing it refuses a button already on a phone. (pinned by: oneTap.spec.ts, OneTapRunbooks.test.tsx)
  • Nothing runs on the first tap: Run runbook opens a Confirm that names the runbook and the device, and the run starts only when you confirm. The command line does nothing without --yes. (pinned by: OneTapRunbooks.test.tsx, OneTapRunbookTests.swift, runbook.test.mjs)
  • It runs once. Each offer carries a signed token bound to your account, that alert and that runbook, good for five minutes; pressing again, or on another surface, answers with the run already started instead of a second run. (pinned by: oneTap.spec.ts)
  • Every run is written to the audit log with the runbook, the device, the surface it came from and the caller’s address, and a person is limited to 6 one-tap runs in 10 minutes. (pinned by: oneTap.spec.ts)
  • Viewers cannot run one, and an alert that is already resolved refuses it. (pinned by: oneTap.spec.ts)

A worked example

  1. A runbook “Restart WAN on rack-sw-01” is approved for one tap. At night the alert fires and the notification offers Run runbook; pressing it opens the alert with “Run Restart WAN on rack-sw-01?” already up. You confirm, the run starts, and a second press shows the same run. (pinned by: OneTapUITests.swift, oneTap.spec.ts)
  2. On the Apple Watch the same alert shows a Run button for that runbook and a Confirm, using the token the iPhone hands over. (pinned by: WatchOneTapUITests.swift)

The bar we measure it against

An approved runbook runs from the iPhone, the Apple Watch, the web Alerts page and the command line behind one confirm, once per alert, with an audit row; and it is recorded on a real collector’s real alert.

Where it stands today

Partly met: on every surface but the Apple Watch, which is not yet proven on real hardware. On 2026-11-08 a real collector on our lab network raised a real alert (a closed port), the page arrived on a real iPhone, and pressing Run runbook on that notification and confirming ran the approved runbook once (audit row, surface “notification”); pressing Run again in the app answered with that same run. The command line and the web Alerts page were proven the same way on 2026-11-02. The Apple Watch run is proven on a simulator only.

Not built or not measured yet

On a real collector’s real alert it has been run from a real iPhone’s notification (2026-11-08) and from the command line and the web Alerts page (2026-11-02). The Apple Watch has only been run on a simulator against a test server, never on a real watch.

You can only run what an admin approved beforehand; it will not suggest or write a fix, and nothing runs without a confirm.

The Android app does not offer one tap yet, and the Apple Watch needs the iPhone to hand it the token.

What admins report from other tools

Reviewers of monitoring tools value restarting a device right from the mobile app, and one lists automated remediation as the step still missing after alert correlation.

Set up a one-tap fix

  1. Open Runbooks in the web app and write or pick the runbook, for example a restart of the device behind a common alert.
  2. Tick One tap from phone and watch on that runbook. Only an admin can.
  3. Install the SoloNOC iPhone app and allow notifications; pair the Apple Watch if you want it there.
  4. When an alert for that device fires, press Run runbook on the notification or open the alert and press Run.
  5. Check the runbook and device named in the Confirm, then confirm. The run starts once.

Questions

Can an alert run a fix by itself?
No. A person must press Run and confirm, and only for a runbook an admin approved for one tap.
What happens if I press it twice?
Nothing new runs: the second press shows the run that already started.
Which devices and surfaces does it work on?
The iPhone app and its notification, the Apple Watch app, the web Alerts page and the command line. The Android app does not offer it yet.
Is it recorded on a real network?
Yes. On 2026-11-08 a real collector’s real alert (a closed port) paged a real iPhone, and pressing Run runbook on that notification ran the approved runbook once; a later press answered with that run. The command line and the web Alerts page were proven the same way on 2026-11-02. The Apple Watch run is on a simulator.

Related

See it before you sign up

Open a real SoloNOC dashboard on a sample network — sites, devices, alerts, topology and incidents — without creating anything.

Or start the free plan

No sign-up, no card. A real SoloNOC account with a sample network, read-only — nothing you press changes anything.

More from SoloNOC

SoloNOC is network monitoring for the one-person IT shop and the small MSP: one agent per site, flat plans, a 14-day trial with no card. Start free.